Company · News
InterPlas Thailand 2026, Bangkok: booth 4B08 at BITEC
Kerke exhibited at InterPlas Thailand 2026 — 17–20 June at the Bangkok International Trade & Exhibition Centre (BITEC), booth 4B08 — bringing the KTE twin screw platform to Thailand's compounding, packaging and recycling processors.
Quick answer
Kerke exhibited at InterPlas Thailand 2026 — the international plastics and rubber machinery exhibition within the ProPak Asia constellation — from 17 to 20 June 2026 at the Bangkok International Trade & Exhibition Centre (BITEC), booth 4B08.
What was on the stand
Thailand's conversion industry is broad, and three segments shaped the stand:
- Packaging compounds. PP and PE formulations for film and thin-wall packaging, where MFR control and pellet cleanliness decide the run — our seven pelletizing methods exist for exactly this.
- Automotive and E&E compounds. Filled and reinforced PP, PA and engineering resins for the Eastern Economic Corridor supply chain, on gravimetric feeding and precise temperature control.
- Recycling. PE/PP film and flake to pellet on two-stage KTE/SE lines, with vacuum venting and IV/MFR retention measured in the trial.
Why this market
Thailand is ASEAN's most diversified plastics processing base — packaging multinationals, an automotive supply chain anchored in the east, and a fast-professionalising recycling sector. Equipment buyers here are methodical: they ask for measured data, reference lines and service response in writing, which matches how Kerke already works — trial-backed quotations, a factory run record with every machine, and wear parts dispatching in 24–48 hours from our own machining floor.
Bangkok also connects us to neighbouring markets in one hall: Cambodian, Laotian and Myanmar processors work through Thai partners, and several conversations at booth 4B08 were about exactly that regional structure.
The questions we answered
| Question | Answer on the stand |
|---|---|
| Film grade PP with 30% talc — possible? | Yes, with the right screw profile and feeding — proven in the 3–7 day trial on your material. |
| Pellet dust for thin-wall packaging? | Pelletizing method is selected for the spec; water-ring and die-face variants give dust-free round pellets. |
| Recycled PP with moisture and odour? | Two-stage layout with vacuum venting; odour and MFR measured in the trial run. |
| Delivery and commissioning to Thailand? | 30–45 days standard, test-run with material before shipment, English documentation and remote or on-site commissioning. |
Visit the works instead
Every machine Kerke sells is built and run in one place: screw elements, shafts and barrels are machined in our Nanjing works, gearboxes are assembled and run in for 24 hours, and every line is tested with material before it ships. If the show was busy, the better meeting is at the factory — send 25–50 kg of your material and we run it on a lab extruder in 3–7 days: pellets, running video, temperatures and output per hour.
Related on this site: All exhibition news · Inside the factory · Machine overview · Turnkey scope
FAQ
What will be on the stand at InterPlas Thailand 2026
Twin screw extruders for Thai compounding, packaging and recycling. Booth 4B08 at BITEC, Bangkok.
Can I still get the InterPlas Thailand 2026 stand report?
Yes - write to kerkepm@gmail.com with the show name in the subject; the deck with the machine configurations shown and their measured outputs comes back within one working day.
Which exhibition comes next?
AP-RubberPlas 2026 in Qingdao - hall N5, booth T139, 8-11 July.
Send your material and target output — an engineer replies within one working day with the closest configuration we have already delivered.