Company · News
Plast Eurasia Istanbul 2025: booth 1224B at Tüyap
The 34th Plast Eurasia Istanbul — Europe's largest plastics show by visitor geography — ran 3–6 December 2025 at Tüyap. Kerke closed its 2025 exhibition year on booth 1224B.
Quick answer
Kerke exhibited at Plast Eurasia Istanbul 2025 from 3 to 6 December 2025 at the Tüyap Fair Convention and Congress Center, booth 1224B. Istanbul sits between three continents, and the hall reflects it: buyers from Türkiye, Central Asia, the Middle East, North Africa and Europe in a single aisle — which is why we keep returning to this show after Istanbul 2024.
What was on the stand
Two applications carried the booth:
- PET flake recycling. Turkish recyclers run some of the largest flake-to-pellet capacities in the region; our two-stage KTE/SE lines and the SE two-stage recycling family target IV retention through the die, with vacuum venting and low-shear finishing.
- Masterbatch and cable compound. High-loading concentrates and HFFR formulations for the regional construction and cable base — with the wear package quoted as a line item, sized for the abrasive fillers these recipes carry.
The KTE platform itself — 15.6 to 135 mm, 1–4,000 kg/h, screws and barrels machined in-house — framed both conversations, and the 24–48 h spare parts dispatch promise drew repeat visitors from the 2024 show.
Why this market
Türkiye is both a market and a crossroads. Domestic demand — construction profiles, packaging, cable — is solid, but the real scale comes from re-export: Turkish processors compound for Central Asia, the Gulf and North Africa. A supplier decision therefore weighs service reach as heavily as machine price, and our answer is the same one that works everywhere: the wear parts source is the factory that machined the screw, spares dispatch in 24–48 hours, and every line is proven on material before it ships.
2025 was our second consecutive year at Plast Eurasia, and the difference showed in the quality of the meetings — more visitors arrived having read the case studies, so the conversation started at the wear package and the trial bench, not at the catalogue page.
The questions we answered
| Question | Answer on the stand |
|---|---|
| PET: how much IV is retained? | Measured in the trial on your flake — published projects hold IV 0.6–0.79 on two-stage lines. |
| Wear parts for an old line from another maker? | We machine elements, shafts and liners to drawing; send the old part or the drawing for a quote. |
| Can we attend a test run before ordering? | Yes — 25–50 kg of material runs on a lab line in 3–7 days, or a FAT at the works before shipment. |
| Delivery time? | 30–45 days standard, test-run with material before shipment. |
Visit the works instead
Every machine Kerke sells is built and run in one place: screw elements, shafts and barrels are machined in our Nanjing works, gearboxes are assembled and run in for 24 hours, and every line is tested with material before it ships. If the show was busy, the better meeting is at the factory — send 25–50 kg of your material and we run it on a lab extruder in 3–7 days: pellets, running video, temperatures and output per hour.
Related on this site: All exhibition news · Inside the factory · Machine overview · Turnkey scope
FAQ
What was on the stand at Plast Eurasia Istanbul 2025
Masterbatch and PET recycling lines for the Turkish market. Booth 1224B at Tuyap.
Can I still get the Plast Eurasia Istanbul 2025 stand report?
Yes - write to kerkepm@gmail.com with the show name in the subject; the deck with the machine configurations shown and their measured outputs comes back within one working day.
Which exhibition comes next?
Chinaplas 2026 in Shanghai (Hall 6.1, booth D46, April) and the International Plastics Exhibition in Mexico City (booth A3540, November).
Send your material and target output — an engineer replies within one working day with the closest configuration we have already delivered.