Model · Triple screw KTE-T
KTE-T-95D Triple Screw Extruder
KTE-T-95D: 93 mm triple screw, 800–1,200 kg/h — high-output black masterbatch for large plants where dispersion and tonnage must both hold. A reference KTE-T-95D triple screw extruder page from Kerke.
KTE-T-95D triple screw extruder — workshop photo 1, Kerke workshop, Nanjing
Triple screw KTE-T — workshop photo 2, Kerke workshop, Nanjing
Triple screw KTE-T — workshop photo 3, Kerke workshop, Nanjing
Triple screw KTE-T — workshop photo 4, Kerke workshop, Nanjing
Triple screw KTE-T — workshop photo 5, Kerke workshop, Nanjing
Triple screw KTE-T — workshop photo 6, Kerke workshop, NanjingQuick answer
The largest triple screw we build: 93 mm, 800–1,200 kg/h, for black masterbatch at industrial scale. It is the machine for plants supplying masterbatch to film and fibre producers who audit dispersion, not just MFI.
Workshop photos and a running video — shot on our own lines, not stock images.
Parameters
| Model | Screw dia. (mm) | Output (kg/h) | Typical product | Note |
|---|---|---|---|---|
| KTE-T-95D | 93 | 800–1,200 | High output black masterbatch | Large plant |
Reference output measured on the stated material family; subject to a material trial. Motor and torque values are per machine, not per screw shaft.
Where it fits in the range
Top of the KTE-T family: the KTE-T-75D below (400–800 kg/h). For duties beyond its band the answer is a parallel line — at this scale the triple-screw platform does not grow further, and filler-type volume duty belongs to the KTE-95B twin screw class.
What it runs
Duties: black masterbatch at 35–45% CB and 1,000 kg/h class, conductive and fibre-grade masterbatch, high-value colour predispersions, and any dispersion-limited product whose volume outgrew the 75D.
Black Masterbatch Extruder Line
Carbon black at 40% costs 20–25% of the output of a general colour masterbatch on the same machine — dispersion eats t…
Color Masterbatch Extruder Line
Colour masterbatch is a dispersion business with a cleaning problem attached: the same line has to make 20% pigment di…
Configuration options
The centre screw of the KTE-T-95D turns opposite the two outer screws, so material is folded twice per flight instead of once — the reason dispersion targets are met at L/D 32–40 where a twin screw needs 44–52. Options to settle at quotation: screw speed ceiling against carbon black grade, water ring or underwater pelletizing (both common on KTE-T), and the liner package, because 30–40% carbon black is the most abrasive duty we build for.
FAQ
Who buys a KTE-T-95D?
Masterbatch producers whose black line is the plant's bottleneck and whose customers audit dispersion. It is a specialist's machine — most plants at this volume run twin screws and accept the longer L/D.
How does energy per kg compare with a twin screw at this output?
Lower on dispersion-limited products: the third folding flank does in a shorter screw what a twin screw does with more length and more heat history. Trial records show the delta per grade.
What is the delivery and installation profile?
45–70 working days including pelletizing, with test-run in Nanjing on your material class. Installation planning mirrors a 95D twin screw line of similar tonnage.
Where these numbers come from
Parameters come from the Kerke parameter table and product master data sheet, cross-checked against commissioning records for the same model and duty. Where a catalogue value and a trial value disagree, the trial value is the one we quote.
Reviewed by the Kerke process team, Nanjing. Page updated 6 November 2026.
Send 25–50 kg — we return pellets, a video and a report with the parameters we used, in 3–7 days.
KTE-T-95D triple screw extruder — the short version
Note on KTE-T-95D triple screw extruder: what separates one machine from another is torque class, L/D and the wear package matched to your material, not the build standard. Shortlist from the tables, then confirm the choice on a trial with your own powder.
Planning an upgrade this quarter? Send the material and the target output — the configuration comes back within one working day.
Every quotation lists the wear package as a separate line, so its cost is visible from day one.
Questions are answered the same day, in English or Chinese.
Note on KTE-T-95D triple screw extruder: the data on this page was last verified on our own test line in Nanjing.
Not sure which KTE-T-95D triple screw extruder configuration fits? Describe the material and the pellet shape required — we answer with a recommendation, not a brochure.
A KTE-T-95D triple screw extruder from Kerke ships with CE documentation, a test-run record and a recommended spare set.
Related on this site: Extrusion lines by application · Extruder selection guide · free extrusion line quotation · Wikipedia: Twin-screw extruder