Twin Screw Extruder For PET Flakes Pelletizing Line
PET bottle flakes was forbidden import to China from June, 2017, so we spent more than 3 months to test special extruder for PET flakes. Finally we found a good solution which can keep good IV and color for PET flakes recycling.
- IV can be kept over 95%, 0.63-0.7
- Pellet Transparent and Beautiful
- Two solutions for your flakes
- Save more energy
- Save more budget for you
Advantages of Our PET Flakes Pelletizing Line Twin Screw Extruder
- Good Dispersion and Compounding
- Easy Solution For Cleaning the Screw
- Uniform and Beautiful End Pellet
- Easy Operation and More Stable
Main Technical Parameters
| Model | Dia .mm | RPM | L/D | Motor kw | Output Capacity kg/hr |
| KTE65 | 62.4 | 600/800 | 32-60 | 90/110 | 200-300 |
| KTE75 | 71 | 600/800 | 32-60 | 132/160 | 400-500 |
| KTE95 | 93 | 600 | 32-60 | 250/315 | 800-1500 |
| KTE135 | 135 | 600 | 32-60 | 500/900 | 1000-2000 |
There are 6 different cutting types for different application
According to your raw materials, We can customize the best solution for your business.
Water-cooling Strands Cutting Type 
Air-cooling Hot-face cutting type
Water-ring Hot-face cutting type
Air-cooling strands cutting type
Water-flowing Cutting Type
UnderWater Cutting Type
Wons Customers By superior Quality
- KERKE has over 11 years experience in compounding extruder;
- We produce core parts like screw elements, barrels by ourself;
- Our team are professional to ensure quality and service;
- Our extruders have been sold more than 60 countries.
Our Extruder Is Enough For You
- You should know that, Europe extruder quality is better than China, because of the steel level. If you can pay 5 times price, you can buy Europe brand;
- If your application is normal filler masterbatch, color masterbatch, engineering plastics, PET f lakes recycling etc. China extruder is enough for you. Will be no any problem;
- Kerke just provides high cost-effective extruder to you, not the highest, neither the lowest, but the more suitable for your business.
We Supply Good Extruder With Reasonable Price
- Extruder Price determines your end product production costper ton, Good price, better competitive advantage;
- Kerke extruder price can make you earn back equipmentinvestment in 2-3 months;
- We do not sell the cheapest extruder, just good qualityextruder at good price;
- You should care about the cheap extruder supplier, there areonly 2 reasons: 1. their quality is so bad with that so cheapprice; 2. That supplier does not have profit at so cheap price, can you imagine a supplier sell extruder with no profit? Howcan they promise the quality and service? I believe ourcustomers are smart, can not be cheated.
Service - Back Support For Your Business
- When you bought good extruder at good price, after-sale servicemeans more for your business success;
- Kerke can provide 7x24 hours a week after-sale service, wepromise you get our support in 2 hours;
- We can post you the spare parts you need in 24 hours;
- Kerke support team located more than 5 countries, China, Iran, Turkey, Indonesia, Pakistan, Mexico etc;
- Kerke service even including market analysis, project feasibilityanalysis, formula guide, competitor investigation etc;
- Your business success need a good partner - Kerke.
